Skip to main content
Filter
3 pieces Vinyl cutter for Roland
Standard cutter to cut transparencies, masking films or thin foils.Sharpening angle: 45°Offset: 0,25mm

€15.95*
3 pieces Vinyl-cutter original Roland
Cutter knives with special hardened cut surface for transparencies, masking films or thin foilsOffset: 0,25mm

€107.20*
Adjustable cutter blade holder for Roland printer
Holder for cutter blades for Roland printers

€10.25*
Cap-Top for Mimaki JV5, JV33, CJV30 and Roland
Compatible spare part without tube connection.

€15.95*
Cap-Top for Roland VS, Mutoh VJ1618, 1638, Mimaki JV33, JV5
Original spare part including connection tubes.

€89.37*
Connections for 2mm tube on ink filter, 2 pieces
Für Schlauchanschluss mit 2mm Innendurchmesser

€7.96*
Damper for Mimaki, Mutoh and Roland
Damper for Mimaki, Mutoh and RolandSuitable for the following large format printers:Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638Mimaki JV34Roland RA-, RE-, RF-, VS(i)-, XF-, XR-SerieOcé CS9160

€9.11*
DX6 print head solvent resistant for Mutoh and Roland
Original print head!For self installation, we assume no warranty.Mutoh spare part no.: DG-43988, DG-42987, DG-42771, DG-43345Roland spare part no.: 6701409010For printheads payment by PayPal is not possible.

€1,933.55*
Flat ribbon cable for Roland VS-, RE-, RA-, XF-printheads 29-pin, 256mm
Roland spare parts no: 1000006702For one Roland VS-, RE- and RA-Roland printhead you need 3 of this cables and one of our part no. FLACH-29-276.For one XF-640 Roland printhead you need 4 of this cables.Contact on the same side of the cable

€6.83*
Flat ribbon cable for Roland VS-, RE-, RA-printheads 29-pin, 276mm
Roland spare parts no: 1000006703For one Roland VS-, RE-, RA-printhead you need 1 of this cable and 3 of our part no. FLACH-29-256Contacts on opposite side

€6.83*
Flat ribbon cable for Roland XR-printheads 29-pin, 390mm
Roland spare parts no: 1000008944For one Roland XR-printhead you need 3 of this cables and one of our part no. FLACH-29-390-2Contact on the same side of the cable

€6.83*
Flat ribbon cable for Roland XR-printheads 29-pin, 390mm
Roland spare parts no: 1000008945For one Roland XR-printhead you need 1 of this cable and 3 of our part no. FLACH-29-390-1Contacts on opposite side

€6.83*
Foil cutter for Roland
For flock foil, textil foil, felt, sandblast foil.Standard cutter for foil cutting, masking film and thin foils.Cutting angle: 60°Sharpening angle: 30°Offset: 0,5mm

€13.22*
Hose for re-lay in hose thread, per meter
Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.

€2.28*
Ink filter 5µ with separate tube connections
Ink Filter with separate tube connections for tube with 4mm diameter. Solvent resistant suitable for all ink types.

€6.83*
Knife holder for cutter, adjustable
Knife holder for cutter, adjustable

€64.48*
Media cutter for Roland
Compatible to the following Roland wide format printers: ROLAND BN-20Roland CJ-SerieRoland CM-SerieRoland CX-SerieRoland FJ-SerieRoland GX-SerieRoland LEC-SerieROLAND LEJ-640ROLAND PC-600ROLAND RA-640ROLAND RE-640Roland RS-SerieRoland SC-SerieRoland SJ-SerieRoland SP-SerieRoland VP-SerieRoland VS-SerieRoland XC-540, XD-540MTRoland XJ-Serie

€11.99*
Original Damper Mutoh ValueJet and Roland VS
The Damper ist an original spare part, no remake!Suitable for the following large format printers:Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638Roland RA, RE, RF, VS(i), XF, XR seriesOcé CS9160

€74.02*
Pad Wipe, Sponge under Wiper for Roland
Original Roland spare part for Roland RA-, RE, RF-, VS- and XR-Series. Not for XF-Series!

€6.39*
Printhead cleaning wipes lintfree, 23x23cm
Woven cleanroom wipes, ideal for pritnhead cleaning

€33.59*
Pump for Roland
Compatible spare part

€35.30*
Repair kit for Roland pumps, new type
Saves the expensive exchange of the entire pump. Only the hose with special connections has to be changed.

€10.25*
Roland pump, new model
Original Roland spare part

€94.70*
Roland Wiper Head Felt
This spare part sits opposite to the wiper in the wiper wheel of Roland VS and should be changed regularly.Original Roland spare part

€16.29*