Roland RA, RE, RF, VS, VSi, XF, XR series

3 pieces Vinyl cutter for Roland

Standard cutter to cut transparencies, masking films or thin foils. Sharpening angle: 45° Offset: 0,25mm

€17.09*

3 pieces Vinyl-cutter original Roland

Cutter knives with special hardened cut surface for transparencies, masking films or thin foils Offset: 0,25mm

€107.20*

Adjustable cutter blade holder for Roland printer

Holder for cutter blades for Roland printers

€10.25*

Cap-Top for Mimaki JV5, JV33, CJV30 and Roland

Compatible spare part without tube connection.

€17.09*

Cap-Top for Roland VS, Mutoh VJ1618, 1638, Mimaki JV33, JV5

Original spare part including connection tubes.

€89.37*

Connections for 2mm tube on ink filter, 2 pieces

Für Schlauchanschluss mit 2mm Innendurchmesser

€7.96*

Damper for Mimaki, Mutoh and Roland

Damper for Mimaki, Mutoh and Roland Suitable for the following large format printers: Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638 Mimaki JV34 Roland RA-, RE-, RF-, VS(i)-, XF-, XR-Serie Océ CS9160

€12.53*

DX6 print head solvent resistant for Mimaki, Mutoh and Roland

Original print head! For self installation, we assume no warranty. Mimaki spare part no.: M015372, M010792 Mutoh spare part no.: DG-43988, DG-42987, DG-42771, DG-43345 Roland spare part no.: 6701409010 For printheads payment by PayPal is not possible.

€1,933.55*

Flat ribbon cable for Roland VS-, RE-, RA-, XF-printheads 29-pin, 256mm

Roland spare parts no: 1000006702 For one Roland VS-, RE- and RA-Roland printhead you need 3 of this cables and one of our part no. FLACH-29-276. For one XF-640 Roland printhead you need 4 of this cables. Contact on the same side of the cable

€11.39*

Flat ribbon cable for Roland VS-, RE-, RA-printheads 29-pin, 276mm

Roland spare parts no: 1000006703 For one Roland VS-, RE-, RA-printhead you need 1 of this cable and 3 of our part no. FLACH-29-256 Contacts on opposite side

€11.39*

Flat ribbon cable for Roland XR-printheads 29-pin, 390mm

Roland spare parts no: 1000008944 For one Roland XR-printhead you need 3 of this cables and one of our part no. FLACH-29-390-2 Contact on the same side of the cable

€11.39*

Flat ribbon cable for Roland XR-printheads 29-pin, 390mm

Roland spare parts no: 1000008945 For one Roland XR-printhead you need 1 of this cable and 3 of our part no. FLACH-29-390-1 Contacts on opposite side

€11.39*

Foil cutter for Roland

For flock foil, textil foil, felt, sandblast foil. Standard cutter for foil cutting, masking film and thin foils. Cutting angle: 60° Sharpening angle: 30° Offset: 0,5mm

€13.22*

Hose for re-lay in hose thread, per meter

Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.

€3.42*

Ink filter 5µ with separate tube connections

Ink Filter with separate tube connections for tube with 4mm diameter. Solvent resistant suitable for all ink types.

€7.96*

Knife holder for cutter, adjustable

€64.48*

Media cutter for Roland

Compatible to the following Roland wide format printers: ROLAND BN-20 Roland CJ-Serie Roland CM-Serie Roland CX-Serie Roland FJ-Serie Roland GX-Serie Roland LEC-Serie ROLAND LEJ-640 ROLAND PC-600 ROLAND RA-640 ROLAND RE-640 Roland RS-Serie Roland SC-Serie Roland SJ-Serie Roland SP-Serie Roland VP-Serie Roland VS-Serie Roland XC-540, XD-540MT Roland XJ-Serie

€12.08*

Original Damper Mutoh ValueJet and Roland VS

The Damper ist an original spare part, no remake! Suitable for the following large format printers: Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638 Roland RA, RE, RF, VS(i), XF, XR series Océ CS9160

€74.02*