3 pieces Vinyl cutter for Roland
Standard cutter to cut transparencies, masking films or thin foils.Sharpening angle: 45°Offset: 0,25mm

3 pieces Vinyl-cutter original Roland
Cutter knives with special hardened cut surface for transparencies, masking films or thin foilsOffset: 0,25mm

Adjustable cutter blade holder for Roland printer
Holder for cutter blades for Roland printers

Connections for 2mm tube on ink filter, 2 pieces
Für Schlauchanschluss mit 2mm Innendurchmesser

Damper solvent resistant, with big strainer, for Agfa, Mimaki, Mutoh and Roland
Connection for hoses with 2,0 mm internal diameter.Solvent resistant housing Solvent resistant, red sealing ring Big strainer for improved flow featuresCompatible spare part

Damper with filter sieve for Agfa, Kodak, Mimaki, Mutoh and Roland
Connection for hoses with 2,0 mm inner diameter.The big filter sieve prevents the ink flow to stop during high printing speed.

DX4 Cap Top for Agfa, Mimaki, Mutoh and Roland
With solvent resistant hose. Reproduction. Not original.OEM spare part numbers (comparison purposes only):Mutoh spare part no.: ME-80077, KY-80077, MY-81854, KY-81854Roland spare part no.: 1000004546, 1000002794

DX4 Headcap, solvent resistant
For repair of damaged print heads or for modification of water-based printhead into solvent resistant.Inclusive sealing ring

DX4 Piezo printhead duo-coloured, solvent resistant for Mimaki, Mutoh and Roland
Original spare part with original Head-ID. New version!The Head-ID is necessary for the flawless action of the printhead. Without the ID the print head is not printing properly, wears out faster and is damaged earlier.Since 2019 we deliver the enhanced version of this printhead which is among others better resistand against UV ink.Mimaki spare part no.: M004905Roland spare part no.: 6000005213 (old version 1000002201)For printheads payment by PayPal is not possible.

Filter Serge Mist
Sponge for flush box. Has to be changed together with Filter Serge Mist Under (next article below).

Filter Serge Mist Under
Flow sponge under Filter Serge Mist, should be changed together.

Flat ribbon cable for DX4 printheads 21-pin
Lenght:: 23cm
Cable to connect printhead to headboard.

Foil cutter for Roland
For flock foil, textil foil, felt, sandblast foil.Standard cutter for foil cutting, masking film and thin foils.Cutting angle: 60°Sharpening angle: 30°Offset: 0,5mm

Hose for routing of cables in hose chain, per meter
Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.

Ink filter 5µ with separate tube connections
Ink Filter with separate tube connections for tube with 4mm diameter. Solvent resistant suitable for all ink types.

Knife holder for cutter, adjustable
Knife holder for cutter, adjustable

Media cutter for Roland
Compatible to the following Roland wide format printers: ROLAND BN-20Roland CJ-SerieRoland CM-SerieRoland CX-SerieRoland FJ-SerieRoland GX-SerieRoland LEC-SerieROLAND LEJ-640ROLAND PC-600ROLAND RA-640ROLAND RE-640Roland RS-SerieRoland SC-SerieRoland SJ-SerieRoland SP-SerieRoland VP-SerieRoland VS-SerieRoland XC-540, XD-540MTRoland XJ-Serie

Nut M5 for hose connection on Damper
Original spare part

O ring for hose fitting at damper

Original Wiper solvent resistant for Agfa, Kodak, Mutoh and Roland
Original spare part

Pad Wiper Tray
Sponge under Wiper

Pad, Wiper Under, Felt under Wiper
Original Roland spare part for SP-300 / 300V, SP-540 / 540V

Printhead cleaning wipes lintfree, 23x23cm
Woven cleanroom wipes, ideal for pritnhead cleaning

Pump for Roland
Compatible spare part