Roland SP-300i, SP-540i, VP-300, VP-540, RS-540, RS-640

3 pieces Vinyl cutter for Roland

Standard cutter to cut transparencies, masking films or thin foils. Sharpening angle: 45° Offset: 0,25mm

€15.95*

3 pieces Vinyl-cutter original Roland

Cutter knives with special hardened cut surface for transparencies, masking films or thin foils Offset: 0,25mm

€107.20*

Adjustable cutter blade holder for Roland printer

Holder for cutter blades for Roland printers

€10.25*

Connections for 2mm tube on ink filter, 2 pieces

Für Schlauchanschluss mit 2mm Innendurchmesser

€7.96*

Damper compatible for Mimaki, Mutoh and Roland

Connection for big hoses with 2,8 mm inner diameter.

€4.56*

Damper solvent resistant for Mimaki, Mutoh and Roland

Connection for a big hose with 2,8 mm inner diameter. Good reproduction. Similar to the original.

€14.80*

Damper with big filter sieve for Mimaki, Mutoh and Roland

Connection for hoses with 2,8 mm inner diameter. The big filter sieve prevents the ink flow to stop during high printing speed. Alternative damper.

€3.42*

DX4 Cap Top for Agfa, Mimaki, Mutoh and Roland

With solvent resistant hose. Reproduction. Not original. OEM spare part numbers (comparison purposes only): Mutoh spare part no.: ME-80077, KY-80077, MY-81854, KY-81854 Roland spare part no.: 1000004546, 1000002794

€27.34*

DX4 Headcap, solvent resistant

For repair of damaged print heads or for modification of water-based printhead into solvent resistant. Inclusive sealing ring

€7.96*

DX4 Piezo printhead duo-coloured, solvent resistant for Mimaki, Mutoh and Roland

Original spare part with original Head-ID. New version! The Head-ID is necessary for the flawless action of the printhead. Without the ID the print head is not printing properly, wears out faster and is damaged earlier. Since 2019 we deliver the enhanced version of this printhead which is among others better resistand against UV ink. Mimaki spare part no.: M004905 Roland spare part no.: 6000005213 (old version 1000002201) For printheads payment by PayPal is not possible.

€589.47*

Flat ribbon cable for DX4 printheads 21-pin

Lenght:: 23cm

Cable to connect printhead to headboard.

€6.45*

Foil cutter for Roland

For flock foil, textil foil, felt, sandblast foil. Standard cutter for foil cutting, masking film and thin foils. Cutting angle: 60° Sharpening angle: 30° Offset: 0,5mm

€13.22*

Hose for re-lay in hose thread, per meter

Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.

€2.28*

Ink filter 5µ with separate tube connections

Ink Filter with separate tube connections for tube with 4mm diameter. Solvent resistant suitable for all ink types.

€6.83*

Knife holder for cutter, adjustable

€64.48*

Media cutter for Roland

Compatible to the following Roland wide format printers: ROLAND BN-20 Roland CJ-Serie Roland CM-Serie Roland CX-Serie Roland FJ-Serie Roland GX-Serie Roland LEC-Serie ROLAND LEJ-640 ROLAND PC-600 ROLAND RA-640 ROLAND RE-640 Roland RS-Serie Roland SC-Serie Roland SJ-Serie Roland SP-Serie Roland VP-Serie Roland VS-Serie Roland XC-540, XD-540MT Roland XJ-Serie

€12.08*