Product information "Easy Gloss Coat / Easy Matt Code liquid lamination 1K"
Easy Gloss Coat / Easy Matt Coat is a water based clearcoat (one- component), its basic is acrylate. It is used as transparent, high- gloss/matt coating on PVC and other vinyl-films for indoor applications. The substrates printed with pigmented solvent inks (logos, lettering, pictures) are protected against attrition and decomposition. Substrates applied with this liquid laminate achieve also an outstanding colour brilliance.
Material properties:
Basic: aqueous acrylatic-emulsion
Colour: glossy / matt
Wet film: 50 - 70μ depending on application
Dry film: 25 - 35μ depending on application
Spreading rate: 15 - 20 sqm per kg
Solids content: 40,0 - 45,0 %
ph-Value: 7,5 - 8,5
Viscosity (20°C): 15-25 sec. (4 mm flow cup)
Specific gravity: 1,04 g/cm3 / density (20°C)
Neutrality: ammonia
Solubility: deioned water
Processing:
Protect against cold. Don’t store or use the lacquer below +5°C. The product may be stored at least 6 months if kept in tightly closed container and below 25°C.
Application:
The product can be apply by usual methods: spray, roll flow and print (offset, screen printing). The viscositiy of the lacquer was adjusted for manual application by roll (e. g. Velours). For spraying or automatic application further adjustment can be necessary. In this case a dilution of max. 5% water is possible.
Spray gun:
Viscosity: 18-22 sec. Dilution: water Nozzle: 1.2-1.6 mm
Pressure: 3-4 bar Spraying: 1-2
Drying-Conditions:
The laminate is a self-crosslinking product. It can be dryed by room temprature and forced drying.
Drying time (for 25 μm dry film):
Dry at room temperature (20-25°C) after 30-45 min. After 12 hours the layer is dry-to-touch and can be rolled. Forced drying (60-80°C) after 30-60 sec. After around one week the cross-linking process is finished and the ready surface has reached its definite chemical resistance and physical properties. In all cases of Emblem coating-systems, the stamp of the single characteristics depends very strongly on the respectively related underground (substrate and/or inks). For this reason we recommend to make trials in every special case.
Login