Standard cutter to cut transparencies, masking films or thin foils.Sharpening angle: 45°Offset: 0,25mm
Cutter knives with special hardened cut surface for transparencies, masking films or thin foilsOffset: 0,25mm
Holder for cutter blades for Roland printers
Compatible spare part without tube connection.
Original spare part including connection tubes.
Damper for Mimaki, Mutoh and RolandSuitable for the following large format printers:Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638Mimaki JV34Roland RA-, RE-, RF-, VS(i)-, XF-, XR-SerieOcé CS9160
Original print head!For self installation, we assume no warranty.Mutoh spare part no.: DG-43988, DG-42987, DG-42771, DG-43345Roland spare part no.: 6701409010For printheads payment by PayPal is not possible.
Roland spare parts no: 1000006702For one Roland VS-, RE- and RA-Roland printhead you need 3 of this cables and one of our part no. FLACH-29-276.For one XF-640 Roland printhead you need 4 of this cables.Contact on the same side of the cable
Roland spare parts no: 1000006703For one Roland VS-, RE-, RA-printhead you need 1 of this cable and 3 of our part no. FLACH-29-256Contacts on opposite side
Roland spare parts no: 1000008944For one Roland XR-printhead you need 3 of this cables and one of our part no. FLACH-29-390-2Contact on the same side of the cable
Roland spare parts no: 1000008945For one Roland XR-printhead you need 1 of this cable and 3 of our part no. FLACH-29-390-1Contacts on opposite side
For flock foil, textil foil, felt, sandblast foil.Standard cutter for foil cutting, masking film and thin foils.Cutting angle: 60°Sharpening angle: 30°Offset: 0,5mm
Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.
Compatible to the following Roland wide format printers: ROLAND BN-20Roland CJ-SerieRoland CM-SerieRoland CX-SerieRoland FJ-SerieRoland GX-SerieRoland LEC-SerieROLAND LEJ-640ROLAND PC-600ROLAND RA-640ROLAND RE-640Roland RS-SerieRoland SC-SerieRoland SJ-SerieRoland SP-SerieRoland VP-SerieRoland VS-SerieRoland XC-540, XD-540MTRoland XJ-Serie
The Damper ist an original spare part, no remake!Suitable for the following large format printers:Mutoh ValueJet 1324, 1604, 1608, 1614, 1617, 1624, 1626, 1628, 1638, 1924, 1938, 2638Roland RA, RE, RF, VS(i), XF, XR seriesOcé CS9160
Original Roland spare part for Roland RA-, RE, RF-, VS- and XR-Series. Not for XF-Series!
Saves the expensive exchange of the entire pump. Only the hose with special connections has to be changed.
This spare part sits opposite to the wiper in the wiper wheel of Roland VS and should be changed regularly.Original Roland spare part
Sits below the Wiper and wipes it off. Should be replaced with Wiper.Original Roland spare part
Suitable for pump and/or connection hoses for all ink typesInternal diameter: 2mmWall thickness: 1mm
Solvent resistant tube with 1mm inside diameter for connection to downside of printhead capping.