Standard cutter to cut transparencies, masking films or thin foils.Sharpening angle: 45°Offset: 0,25mm
Cutter knives with special hardened cut surface for transparencies, masking films or thin foilsOffset: 0,25mm
Holder for cutter blades for Roland printers
The damper is an original spare parts, no remake!Suitable for the following wide format printers:Roland CammJet CJ-400, 500, FJ-40, 42, 50, 52, SolJet SC-500, SJ-500, 600Roland HiFi Jet FJ-400, FJ-500, FJ-600
Length: 27cmThe flat ribbon cable is suitable for the following wide format printers:Agfa Sherpa 43, 54, 62Brunner / Spandex Jetster 43 and 62Kodak 3038, 3043, 3062Mimaki JV2Mutoh RJ-800, RJ-4100Mutoh RJ-6100Mutoh Rockhopper 38Mutoh Rockhopper IRoland CammJet CJ-400, 500, FJ-40, 42, 50, 52, SolJet SC-500, SJ-500, 600
Length: 27cmThe flat ribbon cable is suitable for the following wide format printers:Agfa Sherpa 43, 54, 62Brunner / Spandex Jetster 43 and 62Kodak 3038, 3043, 3062Mimaki JV2Mutoh RJ-800, RJ-4100Mutoh RJ-6100Mutoh Rockhopper 38Mutoh Rockhopper IRoland CammJet CJ-400, 500, FJ-40, 42, 50, 52, SolJet SC-500, SJ-500, 600
For flock foil, textil foil, felt, sandblast foil.Standard cutter for foil cutting, masking film and thin foils.Cutting angle: 60°Sharpening angle: 30°Offset: 0,5mm
Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.
Compatible to the following Roland wide format printers: ROLAND BN-20Roland CJ-SerieRoland CM-SerieRoland CX-SerieRoland FJ-SerieRoland GX-SerieRoland LEC-SerieROLAND LEJ-640ROLAND PC-600ROLAND RA-640ROLAND RE-640Roland RS-SerieRoland SC-SerieRoland SJ-SerieRoland SP-SerieRoland VP-SerieRoland VS-SerieRoland XC-540, XD-540MTRoland XJ-Serie
Original spare part
Suitable as pump and/or connection hose (not solvent resistant).Internal diameter: 2mmWall thickness: 1mm
Suitable for pump and/or connection hoses for all ink typesInternal diameter: 2mmWall thickness: 1mm
Suitable for pump and/or connection hoses for all ink typesInternal diameter: 2mmWall thickness: 1mm
Suitable for hose pumps and/or connection hoses for all ink types.Internal diameter: 2mmWall thickness: 1mm
Standard cutter for normal uses.Standard cutter for transparencies, masking films or thin foils.Cutting angle: 35°Sharpening angle: 37°Offset: 0,3mm
Standard cutter for normal uses. Special for small font's.Standard cutter for transparencies, masking films or thin foils.Cutting angle: 45°Sharpening angle: 30°Offset: 0,3mm
Wiper for Agfa, Kodak, Mimaki, Mutoh and Roland