Standard cutter to cut transparencies, masking films or thin foils.Sharpening angle: 45°Offset: 0,25mm
Cutter knives with special hardened cut surface for transparencies, masking films or thin foilsOffset: 0,25mm
Holder for cutter blades for Roland printers
Connection for hoses with 2,0 mm internal diameter.Solvent resistant housing Solvent resistant, red sealing ring Big strainer for improved flow featuresCompatible spare part
Connection for hoses with 2,0 mm inner diameter.The big filter sieve prevents the ink flow to stop during high printing speed.
With solvent resistant hose. Reproduction. Not original.OEM spare part numbers (comparison purposes only):Mutoh spare part no.: ME-80077, KY-80077, MY-81854, KY-81854Roland spare part no.: 1000004546, 1000002794
For repair of damaged print heads or for modification of water-based printhead into solvent resistant.Inclusive sealing ring
Original spare part with original Head-ID. New version!The Head-ID is necessary for the flawless action of the printhead. Without the ID the print head is not printing properly, wears out faster and is damaged earlier.Since 2019 we deliver the enhanced version of this printhead which is among others better resistand against UV ink.Mimaki spare part no.: M004905Roland spare part no.: 6000005213 (old version 1000002201)For printheads payment by PayPal is not possible.
Sponge for flush box. Has to be changed together with Filter Serge Mist Under (next article below).
Flow sponge under Filter Serge Mist, should be changed together.
Cable to connect printhead to headboard.
For flock foil, textil foil, felt, sandblast foil.Standard cutter for foil cutting, masking film and thin foils.Cutting angle: 60°Sharpening angle: 30°Offset: 0,5mm
Suitable for routing of cables in hose chain from ink cartridges to the damper, for all ink types.
Compatible to the following Roland wide format printers: ROLAND BN-20Roland CJ-SerieRoland CM-SerieRoland CX-SerieRoland FJ-SerieRoland GX-SerieRoland LEC-SerieROLAND LEJ-640ROLAND PC-600ROLAND RA-640ROLAND RE-640Roland RS-SerieRoland SC-SerieRoland SJ-SerieRoland SP-SerieRoland VP-SerieRoland VS-SerieRoland XC-540, XD-540MTRoland XJ-Serie
Original spare part
Original Roland spare part for SP-300 / 300V, SP-540 / 540V
Saves the expensive exchange of the entire pump. Only the hose with special connections has to be changed.
Is sitting behind the wiper and wipes it. Should be changed together with wiper.Original spare part